Could you please update the plugin to version 1.21.1, many people really need this update. We need an update because we can't touch the Jar file from Aternos.
the jump pads work when using java but for GeyserMC players it does not work. I tried setting it so that every living entity gets launched but it does not work
shit plugin, jumppads sometimes launch the player very weak, and sometimes launch de player normally, so it is unpredictable, i would not recommend using this plugin
Benz56 makes great plugins. I've used basically every other plugin they've made, and have bough multiple premium plugins as well. Please support this dev. They make creative and oftentimes necessary plugins that I can't get anywhere else.
The plugin still works, but for those who need it, it's horrible to use it, every time you use the jump, you are several times returning to the sky, until a moment when you crash because you have fly... and deactivating the ANTI - FLY / and enable fly in the world... you just keep coming back in the air, looking like you have lag/delay
Great if you don't restart your server. 3 times now has my jumppads reset their own launch speed to default making it useless to use. but great plugin idea anyway
Plugin might work fine but when using 1.17.1 (I have paper), doesnt seem to be 100% stable for me. Worst case scenario, if youre using a host then be prepared for a hard crash where youll have to wait some time before you can even touch your server again. Maybe you wont crash or maybe you will, proceed with caution for all that use 1.17+. And for crash logs, lets just hope something turns up in your crash folder.
It does its job, the jumppads are a little inconsistent at times though - since I can't find a better one, I just have to deal with it ¯\_(ツ)_/¯
(Sometimes it just throws you far less than most times, also the boost sound plays twice most of the time you walk over a jumppad)
Also it's hard to explain, but I would really like a plugin that "throws" you when you walk over it (you see it on most bigger minigame servers), similar to a jumpboost jump or the same as using {Motion:[ NUMBERS ]} on a mob. This plugin just sort of "levitates" you, which also causes you to not be able to move while flying - I couldn't find a plugin that fills my needs though.
If you have an issue with the plugin then contact me. Please remove your review.
Version: 1.25.4
Bro, do u know why the plates don't work on my server? The version I'm in is 1.12.2. Everything can be configured but it doesn't propel u, I don't know why.
Thank you for this plugin. I thought about putting it on my server, but I have to remove it because players are banned by my "AntiCheatReloaded" anticheat. Is there a solution?
Hey, so i really like this hints why i gave it four stars, there is just a little kink i am having troubles with on the server with it, so i am an admin on a 1.16.3 server And we have the Jumppads version 1.24.20, for short distances the launch pads work great, but for long distances the players are still taking fall damage, I think the problem is that the no fall damage is wearing off too early, because if you look at the feet you can see the particles when you get launched, but they wear off before you hit the ground, Is there any way for me to fix this, or will i have to wait for a new version? Thanks in advance :D
Works well, and is very easy to set up. I personally use this as a way to get out of spawn on my Soup PvP server but I would recommend it to any type of server!
I am trying to use it but whenever i try to create a new jumppad, it just says in chat "/jumppads" and I have no clue why. If you respond, thanks!
I am also using 1.12.2 for my server.
It's a very good plugin, and works very well, however I gave players jumppads.use, and it still says that they don't have permission to do it. Can you please help me also here's the server ip: mc.duckcraft.net
Really good plugin, works a charm. Only suggestion I would have is that it ignores any blocks in the tragectory path and just goes straight through them to reach that ultimate destination. :)
Easy to instal and easy to use.
It is recommended to play along for a while in the beginning. There are some things you have to look at twice and then you know them ;)
Excellent plugin, very easy to use, auto-completion for command parameters. There is a lot of particle/sound effects. The angle, the direction and the power of the jumppads are a very good feature.
Thank you very much !
[16:10:19 WARN]: [JumpPads] Task #268 for JumpPads v1.24.12 generated an exception
java.lang.NoClassDefFoundError: org/bukkit/Particle
at com.live.bemmamin.jumppads.LivingEntityMoveChecker$1$2.run(LivingEntityMoveChecker.java:89) ~[?:?]
at org.bukkit.craftbukkit.v1_8_R3.scheduler.CraftTask.run(CraftTask.java:71) ~[spigot-1.8.8.jar:git-Spigot-21fe707-e1ebe52]
at org.bukkit.craftbukkit.v1_8_R3.scheduler.CraftScheduler.mainThreadHeartbeat(CraftScheduler.java:350) [spigot-1.8.8.jar:git-Spigot-21fe707-e1ebe52]
at net.minecraft.server.v1_8_R3.MinecraftServer.B(MinecraftServer.java:723) [spigot-1.8.8.jar:git-Spigot-21fe707-e1ebe52]
at net.minecraft.server.v1_8_R3.DedicatedServer.B(DedicatedServer.java:374) [spigot-1.8.8.jar:git-Spigot-21fe707-e1ebe52]
at net.minecraft.server.v1_8_R3.MinecraftServer.A(MinecraftServer.java:654) [spigot-1.8.8.jar:git-Spigot-21fe707-e1ebe52]
at net.minecraft.server.v1_8_R3.MinecraftServer.run(MinecraftServer.java:557) [spigot-1.8.8.jar:git-Spigot-21fe707-e1ebe52]
at java.lang.Thread.run(Unknown Source) [?:1.8.0_251]
I like it but i am unsure on how to set permissions to each jumppad to allow users to use them. I could not see anything in the config but i may have missed something. Could you please help me out? Thanks
You can use the command “/jp set permission <permission>” when looking at a jumppad.
Version: 1.24.9
Really easy to use plugin... I have a temp spawn that has a few very long stretches... and SOMEHOW I remembered this specific plugin. Under 3 minutes I looked it up, installed it, set up as many jump pads as I needed. Quick and easy plugin to use! Recommended!
Please disable the no permission message when the player trying to break the plate... Or just add WorldGuard support deny-message flag or priority... Thank you!
The current version is the correct one. The version returned from Spigot will update soon and the notification will go away - please be patient.
Version: 1.24.8
I enjoyed this plugin very much and I'm sure the developers work hard on making it good however I've found that this plugin was causing my server to run slow. Checked this use timings after a few days. I would love to use this plugin again however it's just really resourceful for just a simple thing. In my opinion, not worth it.
Then why didn’t you reach out so I could take a look at it instead of leaving a bad review? This doesn’t help anything. I suggest you remove the review and contact me instead.
Version: 1.24.8
Well don, really useful... but i have a question... how to disable falldamage??? without using world edit -_-
Fall damage should be disabled. If you’re having an issue with the plugin feel free to contact me :D
Version: 1.24.3
Well done, really funny for make auto jump parkour and see your players jump and jump our of control ahah !
Awesome dev no error or spam console or anythings else, drop it into plugins, restart is DONE !
----------------------------
Good developer attention, plugin always update and to many options to the jumppads, so is the best Jumppads Plugin
----------------------------
If you're launching hundreds of blocks it is very difficult to make it 100% precise sadly.
Version: 1.23.0
Great plugin and very realistic trajectory! Is there a version that is completely compatible with WG 7.0.0 / 1.13.2? I'm getting this error in console whenever I use it:
https://pastebin.com/yDbpRa5R but the plugin still works great regardless.
Been using this plugin for a couple of minutes and I can already tell this is a very simple and simply working plugin. Configuration is really easy and you can even play with the sound effects (volume and pitch lower than 1)
I LOVE this plugin but people who dont have op cant use the jumppads and i even did /pex group default add jumppads.use and it says i dont have permission to do that even though i am the owner someone please tell me how i can allow people to use jumppads without op with permissions ex
This is a very good plugin. I have to say you did it very whell. The only issue is:
I typed in /pex user deafult add jumppads.use (I have PermissionsEx installed) exatly how it was in your description. The problem is, as a non-op player I cant use theese pads. Ieven tried to restart my srver but it still went wrong. Please help.
You’re adding the permission to the user “default”. You need to use /pex group default add jumppads.use
Version: 1.20.0
I must say this plugin is amazing. had issues with jumppads and NoCheatPlus. I posted my issue in the discussion where the dev was quick to react, and made several attempts to fix my issue, faster than i could actually test them! The Dev is also very nice, and understanding, helpful and positive. If that isnt 5/5 stars, i honestly dont know what is.
- Digi
Works very well, but I'm also looking at launching players straight up a very large distance (180 blocks) through a small 1x1 hole, and the jump pad wont let me and stops me early.. How can I fix this?
I love this plugin and will be using it on my server 100%! Only issue with it was that it conflicts with pretty much every anti cheat plugin on the market. Ty!
Well it sets the players “flight flag” to allowed when launching. The only issue might be speed. Feel free to drop me a message if there are any issues.
Version: 1.17.0
This plugin is fantastic! Does exactly what it says it does. We have this running on Paper 1.13.2 under Waterfall! Very flexible!
Looking for a good jumppad plugin. No other plugin like this lets you edit all the properties of the jumpbad so easy. Recommend to everyone requiring jump pads!
Even though I do not condone using the review section as a way of forcing/blackmailing developers to fix certain issues I did fix this issue.
Please redo the review; thanks :)
Version: 1.12.1
Excellent plugin, author helped me with one issue that I was having, working fine for 1.8.8 spigot!
Thank you for the review, xNekio!
No problem! Get back to me if you stumble upon anything else :)
Version: 1.12.1
I was searching for about a hour. Then i found this, it works great!
Apart from one thing i dont get how to configure line 48. I tried to set it to FIREWORK_BLAST1 but it didnt work. Also is there a way to mute the presure plate so i dont get the presure plate sound. If you can help please reply to this review. Or DM me on my discord its. JustAiden_#9027
Excellent plugin ! Author is very friendly, he added ALL the feature I requested, in less than a day ! Awesome developper, I'm proud to have bought his other plugin ( PocketGames) that is even more awesome than this plugin :D
Thank you for the review automatizer!
Glad to hear your head isn’t hurting from using the plugin!
Good luck with your own project. Get back to me if you ever need some help again ;)
Version: 1.5.1
Excellent plugin ! Author is very friendly, he added the feature I requested, in less than a day ! Awesome developper
Thanks for the review!
I like the idea, however, it would really reduce the customizability. Lets say you want the jumppad to launch really high (over a wall for instance) but only travel 10 blocks. If you just set the landing position you can not customize the angle you are launced at. Hope you understand what i am trying to explain :)
Version: 1.5.0
Excellent plugin, super fun to mess around with. The JumpPads are very intuitive to set up, makes life very easy :)
The developer is also great, normally responds to messages within a day and is super friendly too. Has helped me out many times with any problems I encountered.
Thank you for the review Sam!
If you ever have suggestions or issues again please feel free to send me a PM :)
Version: 1.3.0
I have not seen more customizable JumpPads plug-ins, the author is without a doubt well done, the plug-in was excellent. But I had a problem on version 1.11.2, the server does not see this plugin in the folder, and the server runs without the plugin. I see this problem only on version 1.11.2, I specifically checked it on version 1.8.8, everything is fine ...
Not working on the plugin? Or am I doing something wrong?
Thanks for the wonderful plugin, I'm waiting for an answer
Thanks!
Feel free to pm with any suggestions or issues :)
Version: 1.3.0
ahaha~Excellent[fun] plugin. I can Reprinted it to
www.mcbbs.net? There will be more people to know it to use it,
*I translate it rapidly into Chinese,*And let them to download here
I will update with you,
Is that ok?XD