# Do you want debug enable debug messages of FoxGate?
  # - Set what messages you want to debug when the debugging mode
  #   is enabled with the command '/fg debug'. This only shows in
  #   the console.
 debug :
    # Messages about Events of the player?
    events : true
    # Messages returning service's responses for better
    # creation or control of this. Enable only for testing,
    # don't recommend enable this in production, otherwise,
    # your console can be flooded a lot.
    services : true
    # Messages about actions making by FoxGate.
    # Like, sending discord webhooks (responses), downloading
    # GeoLocation databases and seding Telegram (requests).
    actions : true

message:
 help:
    debug : 'Debug actions made by FoxGate in the console.'
 debug:
    enable : ' {prefix } <green>You enabled the debug mode. Check the console.'
    disable : ' {prefix } <red>You disabled the debug mode.'

# Whitelist the detection to this name's.
# - Allow players in the list to bypass the detection of
#   the antivpn. To disable this feature, use the value:
#
#   names: []
#
# (!) It's case sensetive!
names :
- ImZowi

# Whitelist the detection to this IP's.
# - Allow ip's in the list to bypass the detection of
#   the antivpn. To disable this feature, use the value:
#
#   ips: []
#
# (!) The value under is the default in localhost.
ips :
- "127.0.0.1"

message:
   help:
      whitelist : 'Edit configuration via command whitelist user/IP.'
   whitelist:
      invalid_usage : ' {prefix } Use the command <aqua>/foxgate whitelist <add/remove> <name/ip><reset>.'
      already : ' {prefix } {IP }<red> is already whitelisted/unwhitelisted in the configuration!'
      whitelisted : ' {prefix } {IP }<green> was whitelisted in the configuration with type <white> {type }</white>. You can <white><underlined><click:run_command: "/foxgate whitelist remove {IP}">click here for remove again</click></underlined></white>.'
      unwhitelisted : ' {prefix } {IP }<green> was unwhitelisted in the configuration with type <white> {type }</white>. You can <white><underlined><click:run_command: "/foxgate whitelist add {IP}">click here for add again</click></underlined></white>.'
      type_ip : 'IP'
      type_name : 'Name'
      problem : ' {prefix } <red>Error while trying to add/remove to the whitelist. Check the console.'
 

database :
  # You want to save the cache in the database in new table
  # instead of use a file? Use this only if you want to use
  # multi-proxy or you're sure you don't has problems with your
  # database.
  #
  # Name of this table it's '"table"_cache', so, if the "table"
  # it's "foxgate", the name will be: "foxgate_cache", or if
  # the "table" it's "vpn_cache", will be "vpn_cache_cache". Always
  # finish with "_cache".
  cache_database : false

message:
   help:
      clearcache : 'Clear the cache file with username saves.'
   clearcache:
      purging : ' {prefix } <white>We are <yellow>purging</yellow> the cache file ...'
      purging_correctly : ' {prefix } <green>The cache file has been purged/reseted.'
      purging_problem : ' {prefix } <red>Error while trying to purge the cache file. Check the console.'
 

antivpn :

    # Limit maximum connections per IP.
    # - When a player join to the server, this is saved
    #   in a list for count the numbers of players in
    #   a connection. If the limit is reached, the
    #   player isn't allowed from joining.
   limiter :
    # Enable this feature?
     enable : true
      # Determine the maximum limit of connections per
      # IP. '3' is the best value by default, increase in
      # case is required. This can help in prevent bots with
      # same IP.
     maxium : 3
      # Message to return when a player is kicked with this option.
      # placeholders: %PLAYER%, %IP%, %UUID%, %COUNTRY% (Premium and
      # only if function is enabled) and %ASN% (Premium and only if
      # function is enabled).
     kick : "<red>You have been disconnected by FoxGate:\n<white>Maximum accounts per IP in your connection.\n\n<gray>This is an error? <white>Join to our discord server.\n<aqua><underlined>discord.idcteam.xyz"
 

configuration :

    # Allow the usage of Metrics (bStats) in your server?
    # - This is only for stadistics usage.
    #
    #   ❝ What data is collected?
    #   We are using bStats (https://bstats.org/), this does not collect
    #   any personal data. Most of the collected data is information about
    #   the plugin's server like player count, online mode, Minecraft version,
    #   Java version, and more. All data gets sent and stored completely
    #   anonymously. See more in information about this in "bStats: Getting Started"
    #   https://bstats.org/getting-started
    #
    # (!) Since 1.0.2 (premium) and 1.1.0 (free), FoxGate uses
    #     their own code base for Metrics, but following their
    #     rules. This use asynchronous methods to send data and
    #     changes to Gson for better stability; improving the
    #     performance of this. You can safety has enable this to
    #     help to the creator without affecting the performance.
   metrics : true
 

# This database is experimental.
jaybird:
  hostname : "localhost"
  port : 3050
  database : "FoxGate.fdb"
  username : "foxgate"
  password : ""

  # These settings apply to this Firebird database, as it uses Hikari for connection pooling.
  # - Default values are suitable for most users. Modify only if necessary.
  pool-settings :

    # The maximum number of connections in the connection pool.
    # - Determines the upper limit of active database connections that can be managed simultaneously.
    # - Setting this too high can overload your database server, while setting it too low can cause delays.
    # Recommended: 10
    maximum-pool-size : 10

    # Minimum number of idle connections to maintain in the pool.
    # - The pool will try to maintain this number of idle (inactive) connections ready for use.
    # Recommended: 1
    minimum-idle : 1

    # Maximum lifetime of a connection in the pool, in milliseconds.
    # - Connections older than this value will be closed and replaced.
    # Recommended: 1800000 (30 minutes)
    maximum-lifetime : 1800000

    # The maximum time in milliseconds to wait for a connection from the pool.
    # - If no connection is available within this time, an exception will be thrown.
    # Recommended: 30000 (30 seconds)
    connection-timeout : 30000
 

  # ⛽ IPAPI IS
  #  https://ipaphttps://ipapi.is/i.is/
  #
  #  Details:
  #  https://ipapi.is/app/signup
  #
  # - 1k daily requests, free account or without key (IP-based for limit).
  # - 10k daily requests, pay $10 monthly.
  # - 20k daily requests, pay $20 monthly.
  # - 50k daily requests, pay $50 monthly.
  # - 100k daily requests, pay $100 monthly.
  # - 2M daily requests, pay $200 monthly.
  ipapiis :
    # Enable this service?
     enabled : true
      # Model request to use.
     model : "JSON"
      # You can use this field in case you
      # has an account in this page.
     key : ""
      # URL.
     url : "https://api.ipapi.is/?q=%IP%&key=%KEY%"
      # Values to check.
     values :
        # Fields to check.
        fields :
       - "is_datacenter"
        - "is_tor"
        - "is_proxy"
        - "is_vpn"
        - "is_abuser"
        - "is_bogon" # Read more about this in https://ipgeolocation.io/blog/bogon-ip-addresses
        # Type to determine.
        type : boolean

  # ⛽ IPStack
  #  https://ipstack.com/
  #
  #  Details:
  #  https://ipstack.com/signup/free
  #
  # - 100 monthly requests, free account.
  # - 50k monthly requests, basic account.
  # - 500k monthly requests, professional account.
  # - 2M monthly requests, professional plus account.
  ipstack :
    # Enable this service?
     enabled : false
      # Model request to use.
     model : "JSON"
      # Insert your key here.
      # Don't delete this field!
     key : ""
      # URL.
     url : "https://api.ipstack.com/%IP%?access_key=%KEY%&security=1"
      # Values to check.
     values :
        # Fields to check.
        fields :
       - "security.is_proxy"
        - "security.is_crawler"
        - "security.is_tor"
        - "security.hosting_facility"
        # Type to determine.
        type : boolean

  # ⛽ 2IP
  #  https://2ip.io/
  #
  #  Details:
  #  https://2ip.io/registration/api/
  #
  # - 10k requests free per month.
  # (Based in Billing)
  2ip :
    # Enable this service?
     enabled : false
      # Model request to use.
     model : "JSON"
      # Insert your key here.
      # Don't delete this field!
     key : ""
      # URL.
     url : "https://api.2ip.io/%IP%?token=%KEY%"
      # Values to check.
     values :
        # Fields to check.
        fields :
       - "asn.hosting"
        # Type to determine.
        type : boolean

  # ⛽ GreIP
  #  https://greip.io/
  #
  #  Details:
  #  https://dashboard.greip.io/login
  #
  # - 15k monthly requests, free account.
  # - 170k monthly requests, Standard account.
  # - 400k monthly requests, Premium account.
  # - Unlimited requests, "Pay-as-you-go".
  greip :
    # Enable this service?
     enabled : false
      # Model request to use.
     model : "JSON"
      # Headers in case is necessary.
      #
      # Set to: 'headers: []' to disable.
     headers:
        'Authorization' : 'Bearer KEY'
      # URL.
     url : "https://greipapi.com/lookup/ip/threats?ip=%IP%"
      # Values to check.
     values :
        # Fields to check.
        fields :
       - "data.threats.isProxy"
        - "data.threats.isRelay"
        - "data.threats.isTor"
        - "data.threats.isHosting"
        # Type to determine.
        type : boolean

  # ⛽ IPGeolocation (PAID SERVICE)
  #  https://ipgeolocation.io/
  #
  #  Details:
  #  https://app.ipgeolocation.io/login
  #
  # This is a PAID SERVICE, require starting from
  # $15 monthly subscription for using IP-security
  # feature. First plan it's $15 (Bronze).
  #
  # - 150k monthly requests, Bronze ($15)
  # - 1M monthly requests, Solver ($65)
  # - 6M monthly requests, Gold ($200)
  # - 120M+ monthly requests, Enterprise.
  ipgeolocation :
    # Enable this service?
     enabled : false
      # Model request to use.
     model : "JSON"
      # Insert your key here.
      # Don't delete this field!
     key : ""
      # URL.
     url : "https://api.ipgeolocation.io/ipgeo?apiKey=%KEY%&ip=%IP%"
      # Values to check.
     values :
        # Fields to check.
        fields :
       - "security.is_tor"
        - "security.is_proxy"
        - "security.is_cloud_provider"
        - "security.is_known_attacker"
        - "security.is_anonymous"
        # Type to determine.
        type : boolean